AIRBRUSHING


Airbrushes, compressors, colorant, accessories and even spray booths put endless possibilities at your fingertips!
View:
Braided 1/8in
  • This is a 10' long braided nylon air hose with 1/8" female connectors on both ends for your airbrushing setup.
  • If your compressor has a 1/4" Male nipple, purchase the 801402 adapter so the hose will attach to the compressor.
Item#:
801428
Your Price:
29.95
Each
  • This plastic side cup is for use with Tritium TS3 (#801123) and Tritium TS5 (#801124) airbrush guns.
  • 125 mL (4.23 fl. oz.) capacity side cup gives you the maximum amount of coverage between refills.
  • Made of a translucent, solvent-safe plastic, this cup is strong yet light.
  • Includes a twist-on cap with a spill resistant vent port.
Item#:
801212
Your Price:
24.95
Each
  • Convert your Tritium, Genesis.XGi, and XSi airbrushes to a 0.2mm nozzle size or use as regular replacement parts.
  • Kit includes fluid nozzle, fluid needle, and nozzle cap.
  • Also includes installation instructions and nozzle wrench.
  • Use for Tritium.TG, Tritium.TS, Genesis.XGi and Genesis.XGi.
Item#:
801521
Your Price:
33.95
Each
  • Convert your Tritium, Genesis.XGi, and XSi airbrushes to a 0.3mm nozzle size or use as regular replacement parts.
  • Kit includes fluid nozzle, fluid needle, and nozzle cap.
  • Also includes installation instructions and nozzle wrench.
  • Use for Tritium.TG, Tritium.TS, Genesis.XGi and Genesis.XSi.
Item#:
801522
Your Price:
29.95
Each
  • Convert your Tritium, Genesis.XGi, and XSi airbrushes to a 0.5mm nozzle size or use as regular replacement parts.
  • Kit includes fluid nozzle, fluid needle, and nozzle cap.
  • Also includes installation instructions and nozzle wrench.
  • Use for Tritium.TG, Tritium.TS, Genesis.XGi and Genesis.XSi.
Item#:
801523
Your Price:
29.95
Each
  • This is an adaptor for your airbrush setup with a 1/8" threaded male end and a 1/4" threaded female end.
Item#:
801402
Your Price:
3.65
Each
  • This is an adaptor for your airbrushing setup with a 1/8" threaded female end and a 1/4" threaded male end.
Item#:
801401
Manufacturer Item:
AD11
Your Price:
3.65
Each
  • This is Chef Rubber airbrush cleaner for cocoa butter.
  • Use this liquid wash to clean any airbrush that has been used to spray cocoa butter onto a project or masterpiece.
Item#:
801250S
The Grex airbrush grip is an innovative accessory for any ordinary airbrush that provides better handling, control and comfort. 

Features:

- Increases holding area of airbrush to provide better handling, control and comfort.

- Reduces hand cramps and fatigue for increased painting time.

- Lightweight durable plastic grip adds strength without a lot of extra weight.

- Simple three piece set easily and quickly installs onto airbrush.

- Fits all Grex airbrushes and most popular airbrush brands/models.

- Ideal for airbrush users with chronic hand problems such as arthritis.

- Can help make using an airbrush easier for novices. 

Specifications:

Type:

Accessory

Weight:

0.53 oz. (15g) includes Grip and Valve Extension

Height:

3.0" (7.6cm)

Length:

5.5" (14cm)

Width:

0.75" (1.9cm)
 

Item#:
801219
Your Price:
18.00
Each
  • Adjustable to attach on table and bench tops.
  • Holds up to 4 airbrushes with two rotatable bottom holders and two attached top holders that can pivot 180 deg./rotate 360 deg.
Item#:
801225
Your Price:
23.95
Each

Everything you need to get started with or take your culinary cocoa butter airbrushing to the next level - in one essential kit!

Launch your creative colored cocoa butter journey to new levels today!

compressor-setup.html
Item#:
801198
Your Price:
1400.00
Each
Gun w/ jar, hose & adapter
  • Any job requiring a simple, yet effective spray is easily completed by the Badger Model 250 Series spray gun.
  • This spray gun is perfect for jobs requiring large overall coverage with medium to heavy viscosity materials such as Chef Rubber colored cocoa butter and airbrush color.
  • The spray pattern can be adjusted from 3/4" (19mm) to 2" (50.8mm) simply by turning the paint tip.
  • This kit contains 1 spray gun w/ color jar, 1 flexible 4ft light weight air hose and a 1/4" (6.4mm) pipe thread fitting adaptor for your compressor.
  • Additional color jars are available in 3/4oz, 2oz and 4oz sizes (#801101J, #801101J2, #801101J4).
  • Operates on 20 to 50 PSI. (1.4 to 3.5 bar).
  • Adaptable to compressors, CO2 tanks and aerosol propellant cans.
Item#:
801101
 
New Item
Your Price:
19.75
Each
Fits Badger 250 Spray Gun
  • Keep a collection of colors at hand for your Badger 250 spray gun with these convenient 2oz jars.
  • Each jar has a twist on lid for easy storage.
  • Fits Badger 250 spray gun #801101.
Item#:
801101J2
Your Price:
3.00
Each
Fits Badger 250 Spray Gun
  • Keep a collection of colors at hand for your Badger 250 spray gun with these convenient 3/4oz jars.
  • Each jar has a twist on lid for easy storage.
  • Fits Badger 250 spray gun #801101.
Item#:
801101J
Your Price:
2.50
Each
Fits Badger 250 Spray Gun
  • Keep a collection of colors at hand for your Badger 250 spray gun with these convenient 4oz jars.
  • Each jar has a twist on lid for easy storage.
  • Fits Badger 250 spray gun #801101.
Item#:
801101J4
Your Price:
3.50
Each
  • This is a set of six 1oz. (30mL) bottles for airbrush colors.
  • For use with Grex Genesis, XB, XBi, XS, XSi, XT, and Tritium.TS.
Item#:
801211
Your Price:
21.95
Each
Quick Disconnect Ports
  • This heavy duty, high quality outlet adapter allows you to connect three air hoses to your compressor.
  • Threads are sealed with teflon tape for dependable service. 
Item#:
801452
Your Price:
80.00
Each
w/ shut off valves
  • This heavy duty, high quality outlet adapter allows you to connect three air hoses to your compressor.
  • Each quick connect outlet features a shut off valve. 
  • Threads are sealed with teflon tape for dependable service
Item#:
801450
Your Price:
99.80
Each
  • This is compressor oil for the proper operation of our 1/2 HP air compressor #801305.
  • It is a high quality synthetic oil.
  • Read compressor instruction manual before adding.
Item#:
801350
Your Price:
25.00
Each
  • When it comes to intricate culinary airbrushing, you should never have to consider cutting corners on the quality of your equipment.  Now you don't have to.  Our Italian built 1/6HP airbrush compressor delivers the power you need in a beautifully crafted precision mechanical unit at a great price.  Don't be led astray by low quality imitators.  Your art is too important to settle on anything less.
    • 55 psi maximum.
    • 1 Amp
    • .88 CFM
    • Voltage: 110 V-60
    • 10 x 5 x 10 in
    • 8 lbs
    • Made In Italy
Item#:
801304
Your Price:
229.00
Each
Dual Piston w/ Reserve Tank
  • Psi @ auto shut-off: 55
  • CFM @ 0 psi: 1.42
  • CFM @ max. psi: 0.74
  • HP-rating: 1/6
  • Operating Pressure: 35-55 PSI

  • Twin Piston Compressor that is portable, compact, oilless and requires no maintenance. 
  • Suitable for spraying cocoa butter.
  • Quiet performance - sound level barely above a whisper. 
  • A simple on/off switch activates this compressor.
  • Includes moisture trap/filter w/regulator & gauge

  • Features an automatic shut-off switch which permits this compressor to turn itself off when not in use and back-on when resuming airbrushing.  This eliminates heat-related moisture build-up, reduces running time and minimizes motor wear. 

  • Also included: coiled airbrush hose, universal airbrush adapter and airbrush holder

  • Dimensions: 11.2" x 11.8" x 9.3" (284.5mm x 203mm x 236mm) 
  • Weight: 17lbs (7.7kg)
Item#:
801306
Your Price:
441.00
Each
  • 114 psi maximum.
  • The best compressor for spraying colored cocoa butter and chocolate.
  • Can run up to 5 airbrushes at once.
  • 400 Watt/3.64 Amp
  • 1.5gal tank, 2.0 CFM Free Air
  • Voltage: 110V-60Hz.
  • Virtually noiseless and totally automatic.

  • * 220V-50Hz single phase option available. Please call for pricing.
compressor-setup.html
Item#:
801305
Your Price:
995.00
Each

The Grex AC1810 is a stylish, feature-rich portable airbrush compressor ideal for the artist on the go. It’s lightweight and compact size is perfect for easy transportation and quick airbrush system setup, but it’s piston style air compression gives it the performance expected from the demanding professional.


  • Oil-less piston design for low maintenance operation.
  • Piston style provides high performance for the demanding professional.
  • Compact portable design perfect for artists on the go.
  • Set and lock regulator prevents settings from changing in the locked position.
  • Integrated pressure gauge for convenient pressure readings.
  • Integrated moisture trap with petcock release helps keep moisture out.
  • Retractable handle stows away when not needed.
  • Automatic shut-off turns compressor off when not in use to save power.
  • Manual on/off switch allows complete shut-off.
  • Integrated airbrush holder for convenient airbrush access.
  • 12’ long coiled plastic air hose for easy space-saving setup.
  • Standard 1/8” fittings for interchangability of hoses and airbrushes.
  • CE, CSA and RoHS Compliant certified.

Specifications:
  • Type: Piston Type Compressor
  • Horse Power: 1/8 HP
  • Displacement: 0.7 cfm (20 L/min)
  • Speed: 1700 rpm
  • Max. Pressure: 60 psi (4.1 bar)
  • Weight: 11 lbs. (4.98kg)
  • Power: 120V / 0.96 A / 60 Hz
  • Noise Level: 55dB
Item#:
801320
Your Price:
199.00
Each
  • Kit includes fluid nozzle, fluid needle, and nozzle cap.
  • Also includes installation instructions and nozzle wrench.
  • Use for Tritium.TG, Tritium.TS, Genesis.XGi and Genesis.XSi.
Item#:
801526
Your Price:
33.95
Each
  • With this adapter, you can use all standard bottom feed plug-in reservoirs and fast-blast caps with your Grex Genesis.XS, XT or Tritium.TS airbrushes.
  • Precision machined of metal for durability.
  • Electro-plated for a smooth easy to clean surface.
  • For use with Grex Genesis.XS, Genesis.XT and Tritium.TS airbrushes.
  • Compatible with all standard bottom siphon reservoirs and fast-blast caps.
  • Reservoirs attach on securely.
Item#:
801416
Your Price:
10.50
Each

Give the 0.5mm Tritium airbrush (#801124) the ability to spray in a fan pattern.  Inspired by full sized spray guns, the Grex ran Spray Cap transforms your airbrush into a "mini spray gun" allowing for more efficient, quicker and even coverage of larger areas. This changes the standard round spray pattern of an airbrush into an elongated fan spray pattern of a spray gun. A very useful and desired trait for laying down even coverage with less passes.  Includes installation and usage instructions.

Check pictured chart for required PSI for a given CFM/LPM. 
Item#:
801524
Your Price:
29.95
Each
  • This is the needle cap for the Grex XA Gun.
Item#:
801516
Your Price:
7.75
Each
  • This is a 0.3mm nozzle for your Grex XA.
Item#:
801517
Your Price:
18.90
Each

Everything you need to get started with culinary airbrushing in one essential kit!

See our Introduction To Airbrush blog article for more information.

Note - Our airbrush color is water-based and not recommended for use on chocolate.
Item#:
801196
Your Price:
529.59
Each
Metal or Plastic
  • Metal or plastic cup for our LVLP Top Gravity Fed Spray Gun (Item # 801703)
  • Volume: 600cc / 600ml 
Item#:
LVLP-CUPS
Tritium TS7 Dbl Act .7m
This is the Grex Tritium.  TS7 at heart, and bundled with all the essential accessories to make it work and play like a mini spray gun. Along with the heavy duty, ready for anything case, the MF.TS is ready for almost anything you throw its way. Reach in to the tightest areas for that perfect finish job. Precision spraying, spot repairs and touch-ups are quick and easy with minimal overspray. This gun even evolves with your needs with plenty of accessories and attachments to accommodate all your applications.

FEATURES:
  • Easy-to-use "pull" trigger controls both air and paint.
  • Cutting edge design for precise control of fine detailed work.
  • Internally mixed media for fine atomization.
  • Ergonomic pistol handgrip with a textured surface for a firm comfortable hold.
  • Patented Quick-Fit™ needle caps are quick and easy to setup and remove.
  • Quick-Fit™ crown cap allows detailed spraying close to work surface.
  • Rear handle Quick-Fit™ needle cap storage for quick and convenient access.
  • Interchangeable side mount reservoirs - use the perfect reservoir for your project.
  • Left or right mount side reservoir to accommodate left and right hand users.
  •  360 degree adjustable reservoirs allows you to work in any position and angle.
  • Side reservoirs allow a straight line of sight to where you're spraying.
  • Preset adjustment knob for precise paint volume control.
  • Replaceable solvent proof teflon seals allows use of all media.
  • Includes 2 reservoirs with lids; 15mL (1/2 fl. oz.) and 125mL (4 fl. oz.)
  • Precisely machined stainless steel nozzle and needle.
  • New nozzle design for improved air flow and durability.
  • Micro fan spray cap offers efficient coverage with minimal overspray.
  • Included round spray cap transforms gun into a super detailed airbrush.
  • Durable heavy nickel chrome plated housing.
  • Convenient to clean design for ease of maintenance.
  • Short passageway from cup to nozzle for a responsive feel.
  • Convert to different nozzle sizes with optional kits.
  • Bundled with a 10' nylon braided hose, G-MAC, 1/4"F adapter & airbrush carrying case.
Item#:
801126
Manufacturer:
Grex Airbrush
Your Price:
298.00
Each
Tritium TS5 Dbl Act .5m
This is the Grex Tritium.TS5 at heart, and bundled with all the essential accessories to make it work and play like a mini spraygun. Along with the heavy duty, ready for anything case, the MF.TS is ready for almost anything you throw its way. Reach in to the tightest areas for that perfect finish job. Precision spraying, spot repairs and touch-ups are quick and easy with minimal overspray. This gun even evolves with your needs with plenty of accessories and attachments to accommodate all your applications.

Features:

- Easy-to-use "pull" trigger controls both air and paint.

- Cutting edge design for precise control of fine detailed work.

- Internally mixed media for fine atomization.

- Ergonomic pistol handgrip with a textured surface for a firm comfortable hold.

- Patented Quick-Fit™ needle caps are quick and easy to setup and remove.

- Quick-Fit™ crown cap allows detailed spraying close to work surface.

- Rear handle Quick-Fit™ needle cap storage for quick and convenient access.

- Interchangeable side mount reservoirs - use the perfect reservoir for your project.

- Left of right mount side reservoir to accommodate left and right hand users.

- 360 degree adjustable reservoirs allows you to work in any position and angle.

- Side reservoirs allow a straight line of sight to where you're spraying.

- Preset adjustment knob for precise paint volume control.

- Replaceable solvent proof teflon seals allows use of all media.

- Includes 2 reservoirs with lids; 15mL (1/2 fl. oz.) and 125mL (4 fl. oz.)

- Precisely machined stainless steel nozzle and needle.

- New nozzle design for improved air flow and durability.

- Micro fan spray cap offers efficient coverage with minimal overspray.

- Included round spray cap transforms gun into a super detailed airbrush.

- Durable heavy nickel chrome plated housing.

- Convenient to clean design for ease of maintenance.

- Short passageway from cup to nozzle for a responsive feel.

- Convert to different nozzle sizes with optional kits.

- Bundled with a 10' nylon braided hose, G-MAC, 1/4"F adapter & airbrush carrying case.

Item#:
801125
Manufacturer Item:
MF.TS
Manufacturer:
Grex Airbrush
Your Price:
298.00
Each
and Pressure Regulator
  • Set includes 1 G-MAC (attaches to your Grex air hose with a quick connect coupler on the other end) and 1 quick connect plug that attaches to your Grex airbrush.
  • Compatible with all brands and types of airbrushes, giving you the freedom to put airflow control on any of your airbrushes, instead of being restricted to a specific airbrush.
  • Comes as a quick connect air coupler allowing you to easily switch between airbrushes to give every airbrush the ability to control airflow.
  • Attaches to the air inlet of your airbrush. This provides better balance compared to having the airflow control below the head of the airbrush. You also don't have to worry about accidentally moving the head of the airbrush while you're simultaneoulsy adjusting pressure and spraying.
  • Designed with a large dial to allow easy air pressure adjustments. This is particularly helpful when spraying and adjusting air pressures simultaneously.
  • Capable of achieving fine adjustments to give precise air flow control. Three full dial rotations to change from zero air flow to full air flow.
  • Ideal for stippling applications. Accurately control stippling size while you're painting real-time. With a simple turn of the dial, the G-MAC gives you the ability to produce course stippling effects to full atomization.
  • For fine lines and detailed work, use the G-MAC to precisely produce optimal airflow for infinite control of paint output.
  • Fully open the G-MAC to allow maximum air flow for wide background spraying and to quickly clean your airbrush during color changes.
compressor-setup.html
Item#:
801424
Your Price:
29.99
Each
Badger 250 Color Jars 6pk
  • This is a pack of 6 tubes cut to length to fit the 4oz jar (#801101J4).
  • The tubes can be cut down to fit other containers as well.
Item#:
801101T
Your Price:
2.50
Each
  • Overall Dimensions: 8'4"W x 5'2"D x 8'2"H
  • 8′ Shelf Type Spray Booth
  • 24 inchFan with Sparkless Aluminum Blade
  • 3/4 H.P. Totally Enclosed Motor 230/460 Volt, 3 Phase
  • 5,350 CFM @ 1/4″SP or 148 FPM
  • Fluorescent Light Fixture(class I div II) – Bulbs Not Included
  • Belt Guard
  • Draft Gauge
  • Two Sets of Paint Filters
  • Full set of assembly instructions and hardware
  • Conforms to OSHA, NFPA and EPA Regulations
  • Booth must be assembled and needs a 110V cord and plug.
  • Working Dimensions: 8’W x 3’D x 4’6″H
  • Note- When used for colored cocoa butter or our edible airbrush color, the spray booth fan is intended to recirculate filtered air, not to externally vent air.
  • If you are interested in purchasing this product, please add it to your cart and save your cart as a quote.  We will make shipping arrangements with you.
Item#:
806080
Your Price:
4778.00
Each
  • Overall Dimensions: 3'4"W x 4'2"D x 8'2"H
  • 3′ Shelf Type Spray Booth
  • 18 inchFan with Sparkless Aluminum Blade
  • 1/4 H.P.Totally Enclosed Motor 115/230 Volt, 1 phase
  • 1,960 CFM @ 1/4″SP or 145 FPM
  • LED Light Fixture (Class I Div II) Includes Bulb
  • Belt Guard
  • Draft Gauge
  • Two Sets of Paint Filters
  • Full set of assembly instructions and hardware
  • Conforms to OSHA, NFPA and EPA Regulations
  • Booth must be assembled and needs a 110V cord and plug.
  • Working Dimensions: 3’W x 2’D x 4’6″H
  • Note- When used for colored cocoa butter or our edible airbrush color, the spray booth fan is intended to recirculate filtered air, not to externally vent air.
  • If you are interested in purchasing this product, please add it to your cart and save your cart as a quote.  We will make shipping arrangements with you.
Item#:
806086
Your Price:
2895.00
Each
View: