S2K Commerce - Products Dropdown
S2K Commerce - Order Entry
AIRBRUSHINGAirbrushes, compressors, colorant, accessories and even spray booths put endless possibilities at your fingertips! |
If your compressor has a 1/4" Male nipple, purchase the 801402 adapter so the hose will attach to the compressor.
Features:
- 125 mL (4.23 fl. oz.) capacity side cup gives you the maximum amount of coverage between refills.
- Made of a translucent, solvent-safe plastic, this cup is strong yet light.
- Includes a twist on cap with a spill resistant vent port.
- For use with Tritium TS3 (#801123) and Tritium TS5 (#801124) airbrush guns
Features:
- Kit includes fluid nozzle, fluid needle, and nozzle cap.
- Also includes installation instructions and nozzle wrench.
- Use for Tritium.TG, Tritium.TS, Genesis.XGi and Genesis.XGi
- Kit includes fluid nozzle, fluid needle, and nozzle cap.
- Also includes installation instructions and nozzle wrench.
- Use for Tritium.TG, Tritium.TS, Genesis.XGi and Genesis.XSi
- Kit includes fluid nozzle, fluid needle, and nozzle cap.
- Also includes installation instructions and nozzle wrench.
- Use for Tritium.TG, Tritium.TS, Genesis.XGi and Genesis.XSi
Use this liquid wash to clean any airbrush that has been used to spray cocoa butter onto a project or masterpiece.
- Increases holding area of airbrush to provide better handling, control and comfort.
- Reduces hand cramps and fatigue for increased painting time.
- Lightweight durable plastic grip adds strength without a lot of extra weight.
- Simple three piece set easily and quickly installs onto airbrush.
- Fits all Grex airbrushes and most popular airbrush brands/models.
- Ideal for airbrush users with chronic hand problems such as arthritis.
- Can help make using an airbrush easier for novices.
Specifications:
Type: | Accessory |
Weight: | 0.53 oz. (15g) includes Grip and Valve Extension |
Height: | 3.0" (7.6cm) |
Length: | 5.5" (14cm) |
Width: | 0.75" (1.9cm) |
- Six 1oz. (30mL) bottles.
- For use with Genesis.XB, XBi, XS, XSi, XT, and Tritium.TS.
- Fits 801215 Bottom Siphon Assembly
- This heavy duty, high quality outlet adapter allows you to connect three air hoses to your compressor.
- Threads are sealed with teflon tape for dependable service.
- This heavy duty, high quality outlet adapter allows you to connect three air hoses to your compressor.
- Each quick connect outlet features a shut off valve.
- Threads are sealed with teflon tape for dependable service
- 86 psi maximum.
- Includes one airbrush hose.
- 1.24/CFM
- Suitable for spraying cocoa butter.
- Piston compressor that is portable, compact, oilless and requires no maintenance.
- Quiet performance - sound level barely above a whisper.
- A simple on/off switch activates this compressor.
- Features also include an automatic shut-off switch which permits this compressor to turn itself off when not in use and back-on when resuming airbrushing.
- This eliminates heat-related moisture build-up, reduces running time and minimizes motor wear.
- Dimensions: 13.3" x 11.6" x 9.6" (340mm x 295mm x 245mm)
- Air output per min./liters: 35~40L/min
- Pressure adjust range: 0~6 bar
- Air tank: 3.5L
- Weight: 16lbs (7.5kg)
When it comes to intricate culinary airbrushing, you should never have to consider cutting corners on the quality of your equipment. Now you don't have to. Our Italian built 1/6HP airbrush compressor delivers the power you need in a beautifully crafted precision mechanical unit at a great price. Don't be led astray by low quality imitators. Your art is too important to settle on anything less.
- 55 psi maximum.
- 1 Amp
- .88 CFM
- Voltage: 110 V-60.
- 10 x 5 x 10 in
- 8 lbs
- Made In Italy
- 114 psi maximum.
- The best compressor for spraying colored cocoa butter and chocolate.
- Can run up to 5 airbrushes at once.
- 400 Watt/3.64 Amp
- 1.5gal tank, 2.0 CFM Free Air
- Voltage: 110 V-60.
- Virtually noiseless and totally automatic.
- * 220V single phase option available. Please call for pricing.
- Oil-less piston design for low maintenance operation.
- Piston style provides high performance for the demanding professional.
- Compact portable design perfect for artists on the go.
- Set and lock regulator prevents settings from changing in the locked position.
- Integrated pressure gauge for convenient pressure readings.
- Integrated moisture trap with petcock release helps keep moisture out.
- Retractable handle stows away when not needed.
- Automatic shut-off turns compressor off when not in use to save power.
- Manual on/off switch allows complete shut-off.
- Integrated airbrush holder for convenient airbrush access.
- 12’ long coiled plastic air hose for easy space-saving setup.
- Standard 1/8” fittings for interchangability of hoses and airbrushes.
- CE, CSA and RoHS Compliant certified.
Specifications:
- Type: Piston Type Compressor
- Horse Power: 1/8 HP
- Displacement: 0.7 cfm (20 L/min)
- Speed: 1700 rpm
- Max. Pressure: 60 psi (4.1 bar)
- Weight: 11 lbs. (4.98kg)
- Power: 120V / 0.96 A / 60 Hz
- Noise Level: 55dB
- Kit includes fluid nozzle, fluid needle, and nozzle cap.
- Also includes installation instructions and nozzle wrench.
- Use for Tritium.TG, Tritium.TS, Genesis.XGi and Genesis.XSi
Features:
- Precision machined of metal for durability.
- Electro-plated for a smooth easy to clean surface.
- For use with Grex Genesis.XS, Genesis.XT and Tritium.TS airbrushes.
- Compatible with all standard bottom siphon reservoirs and fast-blast caps.
- Reservoirs attach on securely.
Give the 0.5mm Tritium airbrush (#801124) the ability to spray in a fan pattern. Inspired by full sized spray guns, the Grex ran Spray Cap transforms your airbrush into a "mini spray gun" allowing for more efficient, quicker and even coverage of larger areas. This changes the standard round spray pattern of an airbrush into an elongated fan spray pattern of a spray gun. A very useful and desired trait for laying down even coverage with less passes. Includes installation and usage instructions.
Check pictured chart for required PSI for a given CFM/LPM.
- Metal or plastic cup for our LVLP Top Gravity Fed Spray Gun (Item # 801703)
- Volume: 600cc / 600ml
- Designed for precise control of detailed work.
- Low air consumption with superior atomization.
- Precisely machined stainless steel nozzle and needle.
- Robust nozzle for improved centering and strength.
- Durable heavy nickel chrome plated housing.
- Pattern Shape Adjustment Knob
- Fluid Adjustment Knob
- Accepts Colored Cocoa Butter, Chocolate, Glaze, Egg Wash.
- Also includes: particle filter, multi-wrench, cleaning brush
- Available nozzle sizes from 1.0mm to 1.8mm.
Requires the purchase of 2 ea. 801402 (Adapter 1/8inM to 1/4inF) to connect Spray gun to 801428 (10' Braided Nylon Air Hose) and then hose to compressor.
Specifications:
Type: | Spray Gun |
Fluid Nozzle: | 1.4mm |
Feed Type: | Top Gravity |
Cup Capacity: | 20.3 fl oz. (600cc) |
Fluid Inlet Size: | M16*1.5P |
Weight: | 0.514kg (1.15 lbs.) |
Air Consumption: | 9.5cfm (270 l/min) |
Operating Pressure: | 1 ~ 2 bar (15 ~ 28 psi) |
Fluid Output: | 150cc/min |
Spray Width: | 310mm (12.2") |
FEATURES:
- Easy-to-use "pull" trigger controls both air and paint.
- Cutting edge design for precise control of fine detailed work.
- Internally mixed media for fine atomization.
- Ergonomic pistol handgrip with a textured surface for a firm comfortable hold.
- Patented Quick-Fit™ needle caps are quick and easy to setup and remove.
- Quick-Fit™ crown cap allows detailed spraying close to work surface.
- Rear handle Quick-Fit™ needle cap storage for quick and convenient access.
- Interchangeable side mount reservoirs - use the perfect reservoir for your project.
- Left or right mount side reservoir to accommodate left and right hand users.
- 360 degree adjustable reservoirs allows you to work in any position and angle.
- Side reservoirs allow a straight line of sight to where you're spraying.
- Preset adjustment knob for precise paint volume control.
- Replaceable solvent proof teflon seals allows use of all media.
- Includes 2 reservoirs with lids; 15mL (1/2 fl. oz.) and 125mL (4 fl. oz.)
- Precisely machined stainless steel nozzle and needle.
- New nozzle design for improved air flow and durability.
- Micro fan spray cap offers efficient coverage with minimal overspray.
- Included round spray cap transforms gun into a super detailed airbrush.
- Durable heavy nickel chrome plated housing.
- Convenient to clean design for ease of maintenance.
- Short passageway from cup to nozzle for a responsive feel.
- Convert to different nozzle sizes with optional kits.
- Bundled with a 10' nylon braided hose, G-MAC, 1/4"F adapter & airbrush carrying case.
Features:
- Easy-to-use "pull" trigger controls both air and paint.
- Cutting edge design for precise control of fine detailed work.
- Internally mixed media for fine atomization.
- Ergonomic pistol handgrip with a textured surface for a firm comfortable hold.
- Patented Quick-Fit™ needle caps are quick and easy to setup and remove.
- Quick-Fit™ crown cap allows detailed spraying close to work surface.
- Rear handle Quick-Fit™ needle cap storage for quick and convenient access.
- Interchangeable side mount reservoirs - use the perfect reservoir for your project.
- Left of right mount side reservoir to accommodate left and right hand users.
- 360 degree adjustable reservoirs allows you to work in any position and angle.
- Side reservoirs allow a straight line of sight to where you're spraying.
- Preset adjustment knob for precise paint volume control.
- Replaceable solvent proof teflon seals allows use of all media.
- Includes 2 reservoirs with lids; 15mL (1/2 fl. oz.) and 125mL (4 fl. oz.)
- Precisely machined stainless steel nozzle and needle.
- New nozzle design for improved air flow and durability.
- Micro fan spray cap offers efficient coverage with minimal overspray.
- Included round spray cap transforms gun into a super detailed airbrush.
- Durable heavy nickel chrome plated housing.
- Convenient to clean design for ease of maintenance.
- Short passageway from cup to nozzle for a responsive feel.
- Convert to different nozzle sizes with optional kits.
- Bundled with a 10' nylon braided hose, G-MAC, 1/4"F adapter & airbrush carrying case.
- Set includes 1 G-MAC (attaches to your Grex air hose with a quick connect coupler on the other end) and 1 quick connect plug that attaches to your Grex airbrush.
- Compatible with all brands and types of airbrushes, giving you the freedom to put airflow control on any of your airbrushes, instead of being restricted to a specific airbrush.
- Comes as a quick connect air coupler allowing you to easily switch between airbrushes to give every airbrush the ability to control airflow.
- Attaches to the air inlet of your airbrush. This provides better balance compared to having the airflow control below the head of the airbrush. You also don't have to worry about accidentally moving the head of the airbrush while you're simultaneoulsy adjusting pressure and spraying.
- Designed with a large dial to allow easy air pressure adjustments. This is particularly helpful when spraying and adjusting air pressures simultaneously.
- Capable of achieving fine adjustments to give precise air flow control. Three full dial rotations to change from zero air flow to full air flow.
- Ideal for stippling applications. Accurately control stippling size while you're painting real-time. With a simple turn of the dial, the G-MAC gives you the ability to produce course stippling effects to full atomization.
- For fine lines and detailed work, use the G-MAC to precisely produce optimal airflow for infinite control of paint output.
- Fully open the G-MAC to allow maximum air flow for wide background spraying and to quickly clean your airbrush during color changes.
- 8′ Shelf Type Spray Booth
- 24 inchFan with Sparkless Aluminum Blade
- 3/4 H.P. Totally Enclosed Motor 230/460 Volt, 3 Phase
- 5,350 CFM @ 1/4″SP or 148 FPM
- Fluorescent Light Fixture(class I div II) – Bulbs Not Included
- Belt Guard
- Draft Gauge
- Two Sets of Paint Filters
- Full set of assembly instructions and hardware
- Conforms to OSHA, NFPA and EPA Regulations
- Booth must be assembled and hardwired (switch to be supplied by electrician)
- Working Dimensions: 8’W x 3’D x 4’6″H
- Over All Dimensions: 8’4″W x 5’2″D x 8’2″H
- Note- The spray booth fan is intended to recirculate filtered air, not to externally vent air.
- 3′ Shelf Type Spray Booth
- 18 inchFan with Sparkless Aluminum Blade
- 1/4 H.P.Totally Enclosed Motor 115/230 Volt, 1 phase
- 1,960 CFM @ 1/4″SP or 145 FPM
- LED Light Fixture (Class I Div II) Includes Bulb
- Belt Guard
- Draft Gauge
- Two Sets of Paint Filters
- Full set of assembly instructions and hardware
- Conforms to OSHA, NFPA and EPA Regulations
- Booth must be assembled and hardwired (switch to be supplied by electrician)
- Working Dimensions: 3’W x 2’D x 4’6″H
- Over All Dimensions: 3’4″W x 4’2″D x 8’2″H
- Note- The spray booth fan is intended to recirculate filtered air, not to externally vent air.
- 4′ Shelf Type Spray Booth
- 18 inchFan with Sparkless Aluminum Blade
- 1/3 H.P.Totally Enclosed Motor 115/230 Volt, 1 Phase
- 2,420 CFM @ 1/4″SP or 137 FPM
- LED Light Fixture (Class I Div II) Includes Bulb
- Belt Guard
- Draft Gauge
- Two Sets of Paint Filters
- Full set of assembly instructions and hardware
- Conforms to OSHA, NFPA and EPA Regulations
- Booth must be assembled and hardwired (switch to be supplied by electrician)
- Working Dimensions: 4’W x 3’D x 4’6″H
- Over All Dimensions: 4’4″W x 5’2″D x 8’2″H
- Note- The spray booth fan is intended to recirculate filtered air, not to externally vent air.
Everything you need to get started with culinary airbrushing in one essential kit!
- 1/6HP Compressor #801304 (A)
- Tritium TS3 .3m Airbrush #801123 (B)
- 10' Air Hose #801428 (C)
- Adapter #801402 (D)
- Grex MAC Valve #801424 (E)
- Airbrush Color Kit - Primary #301100 (F)
Everything you need to get started with culinary cocoa butter airbrushing in one essential kit!
- Micro Spray Gun Set #801125 (A)
- 1/4HP RubbAire Compressor #801306 (B)
- Airbrush Cleaner Solution (C)
- Plain Cocoa Butter 50g #302170 (D)
- Artisan Cocoa Butter 12pc Starter Set #302910 (E)
- Easy-to-use "pull" trigger controls both air and paint.
- Cutting edge design for precise control of fine detailed work.
- Internally mixed media for fine atomization.
- Ergonomic pistol handgrip with a textured surface for a firm comfortable grip.
- Patented Quick-Fit needle caps are quick and easy to setup and remove.
- Quick-Fit crown cap allows detailed spraying close to work surface.
- Rear handle Quick-Fit needle cap storage for quick and convenient access.
- interchangeable side mount reservoirs - use the perfect reservoir for your project.
- Left of right mount side reservoir to accommodate left and right hand users.
- 360 degree adjustable reservoirs allows you to work in any position and angle.
- Side reservoirs allow a straight line of sight to where you're spraying.
- Preset adjustment knob for precise paint volume control.
- Replaceable solvent proof Teflon seals allows use of all media.
- Includes 3 reservoirs: 7mL (1/4 oz.), 15mL (1/2 oz.), 30mL (1 oz.) Side Siphon
- Precisely machined stainless steel nozzle and needle.
- New nozzle design for improved air flow and durability.
- Durable heavy nickel chrome plated housing.
- Convenient to clean design for ease of maintenance.
- Short passageway from cup to nozzle for a responsive feel.
- Convert to different nozzle sizes with optional kits.
Specifications:
Type: | Double Action Pistol Style |
Fluid Nozzle: | 0.3mm |
Feed Type: | Side Gravity |
Fluid Capacity: | 7mL (1/4 oz.), 15mL (1/2 oz.), 30mL (1 oz.) Side Siphon |
Weight: | 180g (6.4 oz.) |
Length: | 159mm (6.25") |
Oper. Pressure: | 5 ~ 80psi (0.34 ~ 5.52bar) |
Features:
- Easy-to-use "pull" trigger controls both air and paint.
- Cutting edge design for precise control of fine detailed work.
- Internally mixed media for fine atomization.
- Ergonomic pistol handgrip with a textured surface for a firm comfortable grip.
- Patented Quick-Fit needle caps are quick and easy to setup and remove.
- Quick-Fit crown cap allows detailed spraying close to work surface.
- Rear handle Quick-Fit needle cap storage for quick and convenient access.
- interchangeable side mount reservoirs - use the perfect reservoir for your project.
- Left of right mount side reservoir to accommodate left and right hand users.
- 360 degree adjustable reservoirs allows you to work in any position and angle.
- Side reservoirs allow a straight line of sight to where you're spraying.
- Preset adjustment knob for precise paint volume control.
- Replaceable solvent proof Teflon seals allows use of all media.
- Includes 3 reservoirs: 7mL (1/4 oz.), 15mL (1/2 oz.), 30mL (1 oz.) Side Siphon
- Precisely machined stainless steel nozzle and needle.
- New nozzle design for improved air flow and durability.
- Durable heavy nickel chrome plated housing.
- Convenient-to-clean design for ease of maintenance.
- Short passageway from cup to nozzle for a responsive feel.
- Convert to different nozzle sizes with optional kits.
Specifications:
Type: Double Action Pistol Style
Fluid Nozzle: 0.5mm
Feed Type: Side Gravity
Fluid Capacity: 7mL (1/4 oz.), 15mL (1/2 oz.), 30mL (1 oz.) Side Siphon
Weight: 180g (6.4 oz.)
Length: 159mm (6.25")
Oper. Pressure: 5 ~ 80psi (0.34 ~ 5.52bar)
Everything you need to get started with or take your culinary cocoa butter airbrushing to the next level - in one essential kit!
Launch your creative colored cocoa butter journey to new levels today!